Measurement Range
0-10.00 mg/L (PPM)
Accuracy
+5% of reading or +0.03 mg/L (PPM) whichever is greater for the range of
0-6.0 mg/L (PPM)
+10% of reading from 6.01-10.00 mg/L (PPM)
Resolution
0.01 mg/L (PPM)
Minimum Deductible Level
.03 mg/L (PPM)
Method
USEPA accepted DPD methodology of analysis for the measurement of Free or
Total residual chlorine.
Cycle Time
Adjustable: 110 seconds to 10 minutes (600 seconds)
Note: the system defaults to 2.5 minutes
Display
Multi-Line Liquid Crystal Backlit Display
Alarms Two Programmable for sample concentration, 120-240VAC 2A Form C Relay
Analog Output
Powered 4-20 mA, 600 Ω drive, isolated
Communications Port
Bi-directional RS-485 with Modbus
Water Pressure
Integral pressure regulator 0.34 bar (5.0PSI) to 10.3 bar (150 PSI)
Flow Rate to Waste
200-400 ml/min.
Operating Temperature
5°C-40°C (41°F – 104°F)
Wetted Materials
PVC, Borosilicate Glass, Reslyn (FFKM), Viton® (FKM), Polypropylene, Stainless
Steel, Acetal, Nitrile, Noryl®, Nylon
Sample Temperature Range
5°C-40°C (41°F-104°F)
Power Supply
Auto-selectable 100-240 VAC, 47-63 Hz, 150VA
Insulation Rating
Double Insulated, Pollution Degree 2, Overvoltage Category II
Environmental Conditions
Not recommended for outdoor use.
Altitude up to 2000 meters
Up to 95% RH (non-condensing)
Regulatory Compliance And Certifications
CE Approved, ETL listed to UL 61010-1-2004 & ETL Certifi ed to CSA 22.2 No.
61010.1 2nd edition dated July 2004
Shipping Weight
9 lbs (4.1 kgs) Reagents shipped separately
Shipping Dimensions
406 mm X 406 mm X 229 mm (16”X 16”X 9”)
Warranty
1 Year from date of shipment
0-10.00 mg/L (PPM)
Accuracy
+5% of reading or +0.03 mg/L (PPM) whichever is greater for the range of
0-6.0 mg/L (PPM)
+10% of reading from 6.01-10.00 mg/L (PPM)
Resolution
0.01 mg/L (PPM)
Minimum Deductible Level
.03 mg/L (PPM)
Method
USEPA accepted DPD methodology of analysis for the measurement of Free or
Total residual chlorine.
Cycle Time
Adjustable: 110 seconds to 10 minutes (600 seconds)
Note: the system defaults to 2.5 minutes
Display
Multi-Line Liquid Crystal Backlit Display
Alarms Two Programmable for sample concentration, 120-240VAC 2A Form C Relay
Analog Output
Powered 4-20 mA, 600 Ω drive, isolated
Communications Port
Bi-directional RS-485 with Modbus
Water Pressure
Integral pressure regulator 0.34 bar (5.0PSI) to 10.3 bar (150 PSI)
Flow Rate to Waste
200-400 ml/min.
Operating Temperature
5°C-40°C (41°F – 104°F)
Wetted Materials
PVC, Borosilicate Glass, Reslyn (FFKM), Viton® (FKM), Polypropylene, Stainless
Steel, Acetal, Nitrile, Noryl®, Nylon
Sample Temperature Range
5°C-40°C (41°F-104°F)
Power Supply
Auto-selectable 100-240 VAC, 47-63 Hz, 150VA
Insulation Rating
Double Insulated, Pollution Degree 2, Overvoltage Category II
Environmental Conditions
Not recommended for outdoor use.
Altitude up to 2000 meters
Up to 95% RH (non-condensing)
Regulatory Compliance And Certifications
CE Approved, ETL listed to UL 61010-1-2004 & ETL Certifi ed to CSA 22.2 No.
61010.1 2nd edition dated July 2004
Shipping Weight
9 lbs (4.1 kgs) Reagents shipped separately
Shipping Dimensions
406 mm X 406 mm X 229 mm (16”X 16”X 9”)
Warranty
1 Year from date of shipment
.jpg)
CÔNG TY TNHH XÂY DỰNG & THƯƠNG MẠI QUANG MINH
Trụ sở Hà Nội
Địa chỉ: Số 12 - Ngõ 45 - Nguyên Hồng - Đống Đa - Hà Nội - Việt Nam
Tel: 04 37737566 / 37737567 Fax: 04 37737565
sales: Bùi Văn Công Tel: 09.19.59.69.85; Hoặc: 09.15.89.22.33
Gmail: bvccvb69@gmail.com
Chi nhánh TP Hồ Chí Minh
Địa chỉ: Số 40 - Giải phóng - Phường 4 - Quận Tân Bình - Tp Hồ Chí Minh - Việt Nam
Tel: 08 62924286 Fax: 08 62924203
sales: Bùi Văn Công Tel: 09.19.59.69.85; Hoặc: 09.15.89.22.33
Gmail: bvccvb69@gmail.com
wesite: www.quangminhvn.com or www.quangminhco.com.vn
Không có nhận xét nào:
Đăng nhận xét